Spiral product cord, 6 m
Couldn't load pickup availability
6 meter long coil cord to connect your grounding sheet or other product to the ground rod lead, ground clamp or adapter plug.
The coil cord has a 10 mm female snap at one end and a 4 mm male connector at the other. As a safety feature, there is a 50 kOhm resistor built in and all internal connections are reinforced with extra metal to increase the life and quality of the cable. The resistor acts as a fuse that cuts off any incoming current to a low level if there is an accidental misconnection. If you want to measure with a multimeter whether the cable is intact, it must be set to at least 200 kOhm, otherwise it will not show anything.
The coil cord is sold separately and is not included with any products.
Please note that our earthing products use 4 mm male and female connectors. All other manufacturers use 4.7 mm male and female connectors. If you need to connect products not sold by Earthingpeople, you will need to purchase a reverse adapter cord.
Frakt
Frakt
Vi skickar normalt varorna samma dag som beställningen inkommit. Ibland kan det ta längre tid beroende på att vi är på mässor, utbildningar eller annat. Ni får ett kvitto från vår webbsida direkt till er e-post när ni beställt. Ni får även en betalningsbekräftelse från Shopify när ni betalt för varorna. Vi skickar en leveransbekräftelse med spårningsnummer när varorna skickats.
Spiral product cord, 6 m
6 meter long coil cord to connect your grounding sheet or other product to the ground rod lead, ground clamp or adapter plug.
The coil cord has a 10 mm female snap at one end and a 4 mm male connector at the other. As a safety feature, there is a 50 kOhm resistor built in and all internal connections are reinforced with extra metal to increase the life and quality of the cable. The resistor acts as a fuse that cuts off any incoming current to a low level if there is an accidental misconnection. If you want to measure with a multimeter whether the cable is intact, it must be set to at least 200 kOhm, otherwise it will not show anything.
The coil cord is sold separately and is not included with any products.
Please note that our earthing products use 4 mm male and female connectors. All other manufacturers use 4.7 mm male and female connectors. If you need to connect products not sold by Earthingpeople, you will need to purchase a reverse adapter cord.
